Product Detail
HR3260-CS / HR3266-CS
HR3260-CS / HR3266-CS
Type : Handheld Scanner
Symbologies : 1D/2D
Spec : Wireless transmission up to 50m

The NLS-HR3260-CS cordless 2D barcode scanner, armed with the state-of-the-art barcode decoder chip invented by Newland, provides an ideal solution for most 1D/2D barcode scanning applications.

●     Compact & Ergonomic Design

This device fits comfortably in any user’s hands to reduce the fatigue of long-time operation, well suited for scan-intensive applications.

●     Cutting-edge Technology

With its core technology (decoder chip)  independently developed by Newland, the device delivers a superior decoding capability on 1D and 2D symbologies (including QR Code, Data Matrix, PDF417).



Image Sensor

752×480 CMOS

Interfaces Supported

RS-232 / USB HID-KBW / USB COM Port Emulation



PDF417, QR Code, Data Matrix


Code 128, EAN-13, EAN-8, Code 39, UPC-A, UPC-E, Codabar,  Interleaved 2 of 5, ITF-6, ITF-14, ISBN, Code 93, UCC/EAN-128, GS1 Databar,  Matrix 2 of 5, Code 11, Industrial 2 of 5, Standard 2 of 5, Plessey,  MSI-Plessey, etc.


≥ 5mil

Light  Source

Red  LED 625±10 nm

Light Intensity

300 LUX (130 mm )

Symbol Contrast

≥ 25%

Scan Angle**

Roll:  360°;  Pitch: ±55°;  Skew: ±55°

Field of View

Horizontal  42°;  Vertical 27.5°


Dimensions of Scanner(L x  W x H)

113.5×73.0×159.0 mm

Dimensions of Cradle(L x  W x H)

195×82.5×47 mm

Weight of Scanner

252 g

Weight of Cradle

150 g


Operating Temperature

-20°C to +50°C

Storage Temperature

-20°C to +70°C


5% to 93% (non-condensing)


Scanner: ± 8 KV (contact discharge); ± 15 KV (air discharge)

Cradle:  ± 6 KV (contact  discharge); ± 8 KV (air discharge)

Ambient Light

0 ~ 100,000 LUX (natural  light)


Communication  Mode

Synchronous, Asynchronous and Batch modes

Radio Technology

2.4 to 2.4835 GHz ISM Band, Zigbee technology

Communication Range

50 m


2200 mAh Li-ion Battery

Expected Charging Time

4.5 hours for full charge

Number of Scans

15000 scans per charge (30 scans per minute, wireless  transmission)


FCC Part15 Class B, CE EMC Class B



RS-232  Cable

Used to connect  the cradle to a host device.

USB Cable

Used to connect  the cradle to a host device.

Power Adaptor

Used to provide  power to the cradle.

Output: DC5V, 1.5A; Input: AC100~240V, 50~60Hz

**Test conditions:

Code 39, 3 Bytes; Resolution=10mil;  W:N=2.5:1; PCS=0.8; Barcode Height=40mm; Scan Distance=210mm, T=23,   Illumination= 200 LUX

Prev 1 Next
OPOS Newland Scanner
Prev 1 Next
Prev 1 Next

USB Cable
Communication with PC

RS232 Cable
Communication with PC

PS2 Cable
Communication with PC



For charge

Model: KSAS0100500150D5

On HR3260-CS  - LA Power Supply 5V/1.5A,1.8m, 3 plugs (US, Europe, UK)  

Model: KSAS7R50500150D5

On HR3266-CS -  LA Power Supply 5V/1.5A,1.8m, 4 plugs (US, Europe, Brazil, Argentina)


1. How to confirm the types of your equipment, X+? X? or other type?

A. X+ type(EM2027 series, last number of serial number is "X+"), supported interface types: USB-DataPipe, USB Com Port Emuation, HID-KBWRS232.

X type(EM2100 series,last number of serial Number is "X"), supported interface types: USB-DataPipe, USB Com Port Emuation, HID-KBWRS232.

2. How to confirm whether the driver has been installed successfully?

A. First, confirm the equipment had connected to PC and the equipment operating normally.

Open: Control Panel> Device Manager> Universal Serial Bus Controller,

If there is "Newland USB Datapipe to series Device" said connection is "USB Com Port Emuation"--COM.

If there is "Newland USB DataPipe Device" said connection is "USB-DataPipe".

If there is yellow "!" before the equipment, delete the equipment, and then scan detection hardware changes,  Wait for the system to automatically install the new drivers finished.

3. Whether it is necessary upgrade the driver of USB-Datapipe from the old version to the new v1.2 USB driver (vcomctrl v1.2.exe)?

A. The new driver support USB Interface of X+ : USB-DataPipe/ USB Com Port Emuation/HID-KBW. If the users of X series, had developed their own application through the USB SDK, recommendations are not updated to the latest driver.

4. If you have installed v1.2 USB driver, how to connect by USB-Datapipe?

A. If your equipment is X+ series, read the set code of USB-Datapipe.(You can download The Manual of Settings Code free from this website.) If your equipment is X series, first you should close USB to COM serve, open Control Panel> Tools> Services, find "Bulk to Serial service", select properties: select stop, Startup Type: Manual.

5. After installed the new driver, how to find out the COM port corresponding to the USB Com Port Emuation?

A. Open Start> all the procedures>vcomctrl>vcomctrl, you can find the number of the COM port there.

6. Why QuickSet can not connect the equipment through USB after installed v1.2 driver?

A. Confirm FAQ-1 driver has installed correctly --> Check out the number of COM port of FAQ-4 --> Confirmed equipment has been launched. Open the Quickset, select the right COM port,manual detection. If the detection failed, you can choose one of the following ways to solve the problem:

i.Check out whether swich to HID-KBW and have set Non-HID-KBW when read The Manual of Settings Code. Change and connect it again.

ii. If it connect through COM before, open "File>PC comm... > USB>OK" in Quickset, try whether it work.

iii. Close Quickset, close connection then open Control Panel> Tools> Services, find "Bulk to Serial service", select properties: select stop, and then start it again. Connect the equipment, open Quickset, try connection through COM.

iv. Close Quickset, close connection. Reboot the equipment, open Quickset, connect it again.